How To Clean Fitbit Charge 3 Band

Download Article

Download Commodity

Fitbit devices are tremendous for encouraging activity, but they become dirty very quickly. Every usage introduces sweat, dirt, and oil that stains the band, clogs the charger ports, and can atomic number 82 to skin irritation. Wipe off the Fitbit as soon as you have it off. Besides, apply cotton swabs and rubbing alcohol to clean the tracker and its charging ports. Finally, treat the band with rubbing booze or a soap-complimentary cleanser.

1. 1

   Remove the tracker from the band. The tracker on some versions, including the Blaze, can be pushed out gently from behind. Others, including the Flex two, crave you to undo the band clasp start.^[ane]

   • Consult your possessor's manual for instructions on how to remove your version's tracker.

2. two

   Dampen a cotton swab in rubbing alcohol. Cotton swabs and rubbing alcohol can be found at full general stores and drugstores. H2o should not exist used, since information technology tin can get inside the tracker and damage it. Also, abrasive scrubbers should not be used.^[2]

   Advertising

3. iii

   Wipe off the tracker. Apply the rubbing alcohol with the cotton swab. Don't use a lot at any time. While rubbing alcohol does dry quickly, too much of it can yet damage the tracker.

4. 4

   Dry it with a microfiber cloth. Remove leftover moisture with a soft textile. Make sure all moisture is removed before returning the tracker to the band. The "pebble" tracker in the Flex two can exist dried completely with a newspaper towel. Avoid using newspaper towels or glass cleaners on tracker screens.

   Advertisement

1. one

   Dip a toothpick or toothbrush in rubbing alcohol. Rubbing alcohol tin exist plant at any general shop or drugstore. H2o should not be used, since it tin damage the electrical parts inside the tracker. Employ a toothpick or former toothbrush rather than a metal scrubber so yous don't scrape the tracker's plating.

2. 2

   Scrub the charging ports. Locate the gold-colored charging port on the back of the tracker. Scrub using the toothbrush or apply the toothpick to pick out any debris you detect.^[iii]

3. 3

   Soak a cotton swab in rubbing booze. Cotton swabs (Q-tips) can be purchased alongside rubbing alcohol at full general stores and drugstores. Again, avoid introducing water into the electrical circuit or using annoying scrubbers that harm the metallic.

4. 4

   Printing the cotton swab onto the charging cablevision. Clean out both ends of the charging cablevision. Push the swab into the openings and brush off the pins inside them. Make certain all debris is removed before y'all finish.^[4]

5. v

   Dry the tracker and cablevision before utilize. Excess moisture can exist removed on the charge port past using a soft cloth or tissue. Otherwise, the ports and pins should wait dry out within a few minutes. And then information technology is safe to charge your tracker again.

   Advertisement

1. one

   Wipe the band with a dry out cloth. Later each use, take a microfiber cloth and wipe off the entirety of the band. This will prevent buildup of dirt and oils that harm the ring and irritate your skin.

2. 2

   Lightly dampen a microfiber material. For stuck-on debris, a dampened microfiber cloth can assistance. Make sure the material is only slightly damp, not dripping. Utilize it to wipe over the band's surface. This tin can be used on whatsoever ring type, including leather and metal.

   • Backlog water will damage leather and tarnish metallic, so minimize your h2o usage equally much equally possible.

3. 3

   Treat fabric bands with lather-gratuitous cleanser. Oils, deep stains, and smells on elastomer and nylon bands can be treated with a cleanser such equally Cetaphil Gentle Skin or Aquanil. Identify a small-scale amount on the tip of your finger and spread it over the band. After, wipe off the ring again with a dampened towel.^[5]

   • Nylon bands tin exist treated with a neutral pH liquid detergent such as Dawn and washed in cold h2o.
   • Treat leather bands with a leather cleaner and conditioner. This helps remove stains too as protect confronting new ones.

4. 4

   Scrub with a soft-bristled toothbrush. Use an quondam toothbrush to loosen stubborn droppings and tough stains. These brushes are soft enough that they won't wear out the band's fibers. You may too dampen a cotton ball in rubbing booze and wipe down the band.^[vi]

5. 5

   Dry off the band. Pat away as much wet as you tin with a microfiber cloth. H2o must not be allowed to sit on metallic or leather. Once this is done, identify the band aside in a safe location. Keep it out of straight sunlight, estrus, and humidity.^[7]

   Advertising

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advert

• Proceed the Fitbit away from water. Use rubbing booze or a slightly dampened towel when cleaning to minimize water exposure.

• Don't allow the ring to rest on dark-colored clothing. The coloring causes night spots on the Fitbit ring.

Thanks for submitting a tip for review!

Advert

About This Article

Article Summary 10

To clean a Fitbit, start by removing the tracker from the ring. Dampen a cotton swab with rubbing alcohol and wipe the surface of the tracker gently, so dry out information technology with a microfiber cloth and set it aside. Use a toothpick dipped in rubbing alcohol to clean the charging ports, then dip a Q-tip in alcohol, swab the charging cablevision, and dry both pieces off with a tissue. Lastly, wipe down the band with a dampened microfiber cloth. If you need to, apply a little soap-free cleanser to scrub dirty material bands. If you desire to learn more, like how to scrub the Fitbit with a toothbrush to clean it, keep reading the article!

Did this summary assistance yous?

Thanks to all authors for creating a page that has been read 37,372 times.

Did this article aid you?

Source: https://www.wikihow.com/Clean-a-Fitbit

Posted by: pricedres1987.blogspot.com

Share this post